CHAL Aluminium Corporation is a fully integrated aluminum manufacturer that offers a wide range of aluminum products and technical services. We are dedicated to being the leading supplier of aluminum plate, cast tooling aluminum plate, aluminum sheet (clad or bare), aluminum foil (clad or bare), aluminum strip, and aluminum circle.
Introduction to the Product 1. The first pure aluminum plate/sheet was introduced. 1050, 1060, and 1100 are the most widely used pure aluminum plate sequence codes. Pure aluminum belongs to a series with a higher aluminum content than the other aluminum series. It is possible to achieve a purity of 99.00 percent. The manufacturing method is relatively easy and the price is relatively low because it does not include any other technical elements. It is a sequence that is currently widely used in traditional industry. The majority of the 1050 and 1060 series are currently in use on the market. Method for calculating the aluminum content of pure aluminum plates According to the last two Arabic numerals, the lower aluminum content of pure aluminum sheet series can be calculated. In comparison to the preceding two Arabic numerals, the 1050 sequence is 50. The eligible product must have an aluminum content of more than 99.5 percent, according to the naming principle of all brands. The aluminum content of 1050 can be as high as 99.5 percent, according to China's aluminum alloy technical standard (GB / t3880-2006). This measurement method is also used to determine the aluminum content of other pure aluminum plate sequences.
Characteristics of pure aluminum plates in general Pure aluminum has a lot of good qualities: 1. Low density: pure aluminum has a density of about 2700kg/m3, which is around a third of that of iron. 2. Cold workable: pure aluminum's strength can be doubled by cold working. It can also be alloyed by adding magnesium, zinc, copper, manganese, silicon, lithium, scandium, and other metals, and then heat treated to make it even stronger. It has a similar basic strength to high-quality alloy steel. 3. Simple to process: Aluminum can be cast using any casting method. Aluminum has a high plasticity and can be rolled into sheet and foil, as well as drawn into pipes and filaments and extruded into a number of civil profiles. For spinning, milling, boring, planing, and other mechanical manufacturing, most machine tools may reach extremely high speeds. 4. Corrosion resistance: a thick and firm protective film of Al2O3 can easily be formed on the surface of aluminum and its alloys. Only the intense action of halogen or alkali ions can cause this defensive film to be broken. As a result, aluminum is resistant to both air and water corrosion (including industrial and marine vapor corrosion). Some acids and agricultural production systems are resistant to corrosion. By using a corrosion inhibitor, it can withstand the corrosion of a weak alkali solution; by taking protective steps, the corrosion resistance of aluminum alloy can be increased. 5. No low-temperature brittleness: As the temperature of aluminum falls below 0 °C, the strength and plasticity of the material increases, not decreases. 6. Excellent electrical and thermal conductivity: Aluminum has a lower electrical and thermal conductivity than silver, copper, and gold. 7. High reflectance: the polished aluminum surface has a white light reflectance of more than 80%. The higher the purity, the more reflectance there is. Aluminum, on the other hand, has excellent infrared, ultraviolet, electromagnetic wave, and thermal radiation reflection properties. 8. There is no magnetism, effect, or spark since there is no magnetism. 9. Absorption of sound.